TOOLING - RIVETNUT

*
RTS AP4 Tool

Air Power 4 - A professional hydraulic/pneumatic blind rivetnut tool with a multifunction trigger incorporating both spin on and off. This tool is designed for industrial use and requires a regulated compressed air supply.

Capacity: M3-M12
Weight: 1,65kg
Dimensions: 270mm x 285mm x 99mm
Stroke: 7mm
Pressure required: 5-7 Bar
Traction power: 18,5kN
Equipment: Conversion kit blind rivet nuts: M4-M8
*
RTS 74200 Tool

The 74200 model is a lightweight ergonomic tool for placement of a wide range of threaded inserts. It features a one step trigger for simplicity and ease of use whilst the tough plastic body makes this tool capable of withstanding the toughest of production lines. The 74200 can be suspended or used as a hand tool, allowing maximum installations to minimise your installation costs.

Rivetnuts: M4 to M12
Weight: 2.2 kg (4.9lb)
Pull Force: 19.1 (kN) (4300 lbf)
Stroke: 7 mm (0.276")
Motor Speed: 2000 rpm spin on/spin off
*
Prosert XTN20

The new Prosert XTN20 is a super lightweight durable rivet nut tool with a high power to weight ratio, fast cycle times, excellent ergonomics and great flexibility.

Patented dual operating mode technology allows the tool to work in stroke setting or pull to force modes ensuring that whatever your requirements the tool can be set to maximise your production. Down time is also reduced with the patented tool free mandrel switchover system which is unique to this tool.

Key features and benefits:

Flexible - operation in both pull-to-force or pull-to-stroke modes
High forcE -to-weight ratio of 11.1kN/kg
Practical - standard hex head cap screws can be used as mandrels
Long lasting - hydraulic lip seals maximise re-priming intervals
Convenient - reverse spin-out button should the tool become stuck
Easy to use - patented, tool free, quick installation mandrel system
Economical - Tool supplied complete with M4 to M8 nose kits


Specifications

  • Pull Force at 5 bar: 17.65 kN (3968 lbf)
  • Air Supply Pressure: 5 - 7 bar (72.5 - 101.5 lbf/in)
  • Piston Stroke: 3 - 7 mm (.118 - .275 in.)
  • Noise Level: <75 dB(A)Weight incl. nose equipment: 1.59 kg (3.50 lb)
  • Cycle Time: <1.5 sec. per complete setting
*
N1A2

Hi-Power Model up to M12 rivet nut

Operating speed: Approx. 40% up comparing with previous Lobster model
Power: Approx. 40% up comparing with previous Lobster model
Weight: Approx. 20% lighter comparing with previous Lobster model
  • Easily insert rivet nuts(Simply push the rivet nut to the mandrel)
  • Clutch mechanism(Make accurate installation and avoid working failure)
  • Easy stroke adjustment
  • Good weight balance for usability(Less fatigue)
  • One-touch reverse buttom(for in case of accident)

Video: https://youtu.be/wFdRgii67Us
*
RTS M4+ Tool

M4+ Manual professional hand tool with double levers allowing effortless setting of M6 to M12 blind rivetnuts with a push/pull mechanism in the rear, for quick installation.

Capacity: Blind rivetnuts: M6-M12
Weight: 2,4kg
Length: 485mm
Body material: High strength ABS (plastic)
Lever material: Steel
Equipment: Conversion kit blind rivet nuts: M6-M12

Click here for Data Sheet

*
RTS M5 Tool

M5 professional hand tool with ratchet action giving effortless setting of large size blind rivet nuts especially designed for operation in restricted areas.

Capacity: Blind rivetnuts: M6-M12
Weight: 1,25kg
Length: 212mm
Body material: Steel
Lever material: Steel
Equipment: Conversion kit blind rivet nuts: M6-M12
*
Hand Nutter HND005

A light duty single lever Rivetnut Tool for use in low volume production or workshop environments.

  • Right angle tool can access restricted applications
  • Designed for one handed operation
  • Operating range M3 – M6 In Aluminium and Steel, M3 – M5 in Stainless Steel
  • Comes complete with M3 – M6 adaptor sets
*
Hand tool KJ15

Simple Tommy Bar operated tool for low volume or repair work.

  • Right angle tool can access restricted applications
  • Operating Range M4 – M10 in all materials
  • Single size dedicated tool
*
Hand tool KJ15 KIT

Simple Tommy Bar operated tool for low volume or repair work.

  • Right angle tool can access restricted applications
  • Operating Range M3 – M10 in all materials
  • Contains 5 tools to set sizes M4 – M10
  • Supplied in robust plastic case
THE COMPLETE BLIND FASTENING SOLUTION