Air Power 4 – A professional hydraulic/pneumatic blind rivetnut tool with a multifunction trigger incorporating both spin on and off. This tool is designed for industrial use and requires a regulated compressed air supply.
Capacity: M3-M12 Weight: 1,65kg Dimensions: 270mm x 285mm x 99mm Stroke: 7mm Pressure required: 5-7 Bar Traction power: 18,5kN Equipment: Conversion kit blind rivet nuts: M4-M8
RTS 74200 Tool
The 74200 model is a lightweight ergonomic tool for placement of a wide range of threaded inserts. It features a one step trigger for simplicity and ease of use whilst the tough plastic body makes this tool capable of withstanding the toughest of production lines. The 74200 can be suspended or used as a hand tool, allowing maximum installations to minimise your installation costs.
Rivetnuts: M4 to M12 Weight: 2.2 kg (4.9lb) Pull Force: 19.1 (kN) (4300 lbf) Stroke: 7 mm (0.276″) Motor Speed: 2000 rpm spin on/spin off
The new Prosert XTN20 is a super lightweight durable rivet nut tool with a high power to weight ratio, fast cycle times, excellent ergonomics and great flexibility.
Patented dual operating mode technology allows the tool to work in stroke setting or pull to force modes ensuring that whatever your requirements the tool can be set to maximise your production. Down time is also reduced with the patented tool free mandrel switchover system which is unique to this tool.
Key features and benefits:
Flexible – operation in both pull-to-force or pull-to-stroke modes High forcE -to-weight ratio of 11.1kN/kg Practical – standard hex head cap screws can be used as mandrels Long lasting – hydraulic lip seals maximise re-priming intervals Convenient – reverse spin-out button should the tool become stuck Easy to use – patented, tool free, quick installation mandrel system Economical – Tool supplied complete with M4 to M8 nose kits
Pull Force at 5 bar: 17.65 kN (3968 lbf)
Air Supply Pressure: 5 – 7 bar (72.5 – 101.5 lbf/in)
Piston Stroke: 3 – 7 mm (.118 – .275 in.)
Noise Level: <75 dB(A)Weight incl. nose equipment: 1.59 kg (3.50 lb)
Cycle Time: <1.5 sec. per complete setting
Hi-Power Model up to M12 rivet nut
Operating speed： Approx. 40％ up comparing with previous Lobster model Power： Approx. 40％ up comparing with previous Lobster model Weight： Approx. 20％ lighter comparing with previous Lobster model
Easily insert rivet nuts（Simply push the rivet nut to the mandrel）
Clutch mechanism（Make accurate installation and avoid working failure）
M4+ Manual professional hand tool with double levers allowing effortless setting of M6 to M12 blind rivetnuts with a push/pull mechanism in the rear, for quick installation.
Capacity: Blind rivetnuts: M6-M12 Weight: 2,4kg Length: 485mm Body material: High strength ABS (plastic) Lever material: Steel Equipment: Conversion kit blind rivet nuts: M6-M12 Click here for Data Sheet
RTS M5 Tool
M5 professional hand tool with ratchet action giving effortless setting of large size blind rivet nuts especially designed for operation in restricted areas.